use curve中文是什么意思

发音:

中文翻译
造句

利用曲线
使用曲线

use n. 1.使用，利用，应用；使用的机会[需要]。 2.使 ...
curve n. 1.曲线；弯曲；弯曲物。 2.曲线规 (＝Fren ...
be in use 被使用; 在使用中
be of no use 没有用处
by use of 通过利用
for the use of 应要求
for use 伐木制材; 以便使用
for use on 适合车型
in use 在使用中，在使用着; 在使用着, 在应用
into use 开始得以使用
it is no use 没必要; 没用; 重要性)
no use 没用, 没有用
no use for 不喜欢
of no use 无用
of use 有用
use a as 把...用作
use as-is 照用
use at （使用位置）：当视口回放或者渲染时存储粒子运动到缓存中。默认为视口。; （使用在）：当视口回放或者渲染时存储粒子运动。默认为视口。
use by 此日期前食用
use for 用于
use in 用于
use on 用于
use this 使用这个
use … as 把…用作; 用……作为

"查查词典"手机版

千万人都在用的超大词汇词典翻译APP

例句与用法

According to the at minicar project of chongqing changan automobile co . ltd . , a series of researches have been carried out . base on the characteristic tests of engine and torque converter , the mathematical models are established using curve fitting
在发动机性能试验与液力变矩器性能试验的基础上，采用曲线拟合的方法得到了发动机及液力变矩器的数学模型，并对两者联合工作的输入、输出工作特性进行了分析。
The contents of the thesis are summarized as follows : 1 . by using curved - fitting method , calculation of local angular deflection of canvas plate is studied , with the help of cubic spine function , canvas plate is formed and then its local angular deflection is worked out . 2
本文所做的工作概括如下： 1 、运用曲面拟合方法研究帆形板局部角变形的计算方法，通过三次样条函数建立船体帆形外板，然后计算得出帆形板的局部角变形。
Paper [ 76 ] provides a integer algorithm for rasterizing free curves , we need change the curve form to implicit function form , then use curve ' s positive - negative property to draw , but we ca n ' t use this algorithm when curve ' s degree is higher than 3 and this algorithm ca n ' t avoid using multiplication ; paper [ 77 ] provides a new generating algorithm , this algorithm can draw bezier very well , but for b - spline curve , we need use convert them into bernstein base form . because this process spends a lot of time , this algorithm has not a good speed and effect for rendering rational b - spline curve
现在经常采用的算法也是基于几何的算法(即线式生成算法)和基于像素的算法(点式生成算法) ;文献78 ]提供了一种有理参数曲线的快速逐点生成算法，该算法对有理b吮ier曲线的绘制，能起到很好的作用，但是对于有理b样条曲线，必须先通过多项式的代数基与bemstein基间的变换矩阵，把原式用bemstein基表示，这一过程由于计算量大，降低了曲线生成的速度和效率
When applying the conventional fourier pseudospectral method on cartesian grids , curved interfaces are represented in a " staircase fashion " causing spurious diffractions . it is demonstrated that these non - physical diffractions can be eliminated by using curved grids that generally follow all curved interfaces
在直角坐标系下用传统伪谱法模拟地下界面时，弯曲起伏的连续界面会因离散化而成为阶梯状界面，这种阶梯状界面在模拟波的传播时，将产生人为绕射，降低合成记录的精度。
As the basic concept , the first step is to modeling by ug . there is different model between propeller and commonly hardware , so we must be use curve modeling , at the same time , characteristic modeling and entity modeling in the whole process . first , we apply offset data for spline fit curve , then scanner smooth curve face
首先在三维绘图软件ug中对螺旋桨及叶片进行三维建模,由于螺旋桨的造型不同于一般零件的cad造型,故在造型过程中同时采用了曲面造型,特征造型和实体造型几种方法,先由型值数据生成样条曲线,再由样条曲线扫掠生成平滑的曲面,最后通过圆整?延伸得到螺旋桨的三维模型。
The author also studied ugii , interface statements and internal functions , after a development by using visual c + + 、 ug / open api , inherit functions of ugii , the functions of curve smooth , surface smooth and surfaces combination . after the tests in motorcycle reverse engineering , 1 ) the bad points can be deleted by using curve smoothing function , so the curve become more smooth
二次开发的功能在某摩托车型的反求过程中的应用，取得了良好的效果： 1 )曲线中的坏点可以通过调用曲线光顺的模块而得到修改，曲线的光顺性大大改观。
A obstacle diagnosing expert system of pu1 steamer fan electrical machine have been set up by using the expert system tool in the movex software and mechanical vibration frequency spectrum knowledge . for the purpose of more straight dealing with vibration frequency spectrum curve , a diagnostic knowledge disposing system is developed by using curve compare method and vc + + and matlab software
在机械设备故障诊断研究中，以pu1蒸汽风机发电机组为研究对象，结合movex软件开发了基于机械振动谱图知识的故障诊断专家系统，同时为了更加直观地处理谱图曲线，另行用vc + +与matlab软件开发一套基于曲线拟合的机械设备故障诊断知识处理系统。
Through approximating the deformation space by using curve and surface offset techniques , we obtain a unified space deformation model . thus the sampling problem is solve naturally at the same time , we provide a unified kernel for the implementation of different space deformation models
通过对曲线、曲面控制变形中的变形空间进行等距逼近的方法，我们实现了一个一维、二维、三维控制手段的统一空间变形模型，这种统一不但自然地解决了曲线、曲面控制变形中的采样问题，同时为实现各种空间变形提供了一个统一的数学模型。
2 . on the basis of analyzing experimental data for slope land of loess plateau in different slope gradient and rain intensity and soil and water conservation tillage measures , using curve - fitting techniques , a soil infiltration rates model was woke out , the accuracy of the model is tested by a series of experiment data , the result of these indicate that the soil infiltration rates model is accurate and has good stability for slope land of loess plateau . 3 . using soil infiltration rates and runoff time and wetting frontal surface depth of soil infiltration reflect effect of factor affecting soil infiltration rates
( 3 )采用土壤稳定入渗速率、坡面开始产流时间、土壤湿润锋面下渗深度三个指标来反映坡耕地土壤入渗影响(土壤性质、土壤初始含水率、地面坡度、降雨强度、积水深度、水土保持耕作措施等)因素效用大小，建立了各因素与三个指标的关系模型，详细分析了不同水土保持耕作措施强化土壤入渗的影响，其中等高耕作作用最为显著，其次是人工掏挖和人工锄耕。